Plastic EVA Granulation Machine

Plastic EVA granulation machine is mainly used for producing EVA or other fillers, and all grades of masterbatch, filler and modification, blending and modification, functional parent granules (black carbon granule, flame-retardant granule, degradable granule, double protective granule), various cables, special materials (EVA, fluorine rubber, TPR sole material, UV protection material), reactive and extruding, powder coating.

Working Principle
First, by the high-speed mixer, you can mix all materials equally according to their different percentages. Then we send the mixed material into the hopper using a screw charger. Our hopper is specially designed so that the material in the hopper won't clump together. Different materials require different screw designs to meet the characteristics of the material.

Suitable Material
PP/PE/EVA + CaCO3 + Wax + Butter + other additives. Our extrusion machine can add CaCO3 up to 85%.

The Advantages of This Machine
1. Highly efficient: The machine is automatic with low power consumption.
2. Special Screw Design: We will design the screw according to the customer's different materials, and the material of the screw and barrel can be 38CrMoAl or bimetallic.
3. High Capacity: The capacity of the machine is about 80kg/h; we can customize it up to 1000kg/h.
4. Long Life: The machine has a long service life.

Other Types of These Kinds of Machines

Line Components

More Machine Photos
Rotary charger for sending the material into the hopper

Machine line

Wind hot die face pelleting system

Main Extruder

Material for producting

If you need more details of this kind of machine, kindly contact me. I can send you more detailed photos and videos.


1. We supply the following necessary documents with the machine:

1. Machine layout
2. Electricity diagram
3. Machine certificate
4. General manual book/maintenance book

2. We provide a one-year quality guarantee. During this period, if the machine's malfunction is approved to be our responsibility, we will send the broken spare parts to you via DHL courier or another method within 7 working days after receiving the complaint. And send technicians to the buyer's factory for maintenance. All charges are on our account.

3. After the one-year warranty, if you need, we can provide payable spare parts and technician's visiting maintenance, and any broken spares we can send you as soon as possible.

4. We trust that our quotation meets your requirements and we will gladly provide further information.

5. 24-Hour Service: Cell +86-13915707468

Cross Flow Cooling Tower

Since the height of the filling is close to the tower top, the water eliminator does not occupy much space, and the overall height of the cross-flow tower is small, which makes it relatively compact compared with counter flow type, and therefore lower air inlet speed and power consumption as well.

The cross-flow tower adopts a water distribution system that will let the water drop fall naturally by gravity. Thereby, water distribution holes are not easy to be blocked, as water distribution is even and maximizes the performance of the tower fillings. The inspection manhole also enables routinely maintenance without machine shutdown.

A lower part of the cross-flow tower filling is submerged in the water, so that the water flows through the surface of the filling and directly falls into the below tank, making low noise.

The cross-flow tower fan is located in the middle of the Cooling Tower, while the filling, on both sides of the tower. So the amount of splashing water is very small.

Cross Flow Cooling Tower,Cooling Tower Cools Water,Induced Draught Cooling Tower,Induced Draft Cross Flow Cooling Tower

Guangdong Jiema Energy Saving Technology Co.,Ltd , https://www.jmheatexchanger.com