Gamma 99% Purity Medical Oxygen Generator is used to produce oxygen with purity up to 99%. It is the combination of standard 93% purity Oxygen Generator with one oxygen purifier. Detailed parts combination is as below:
Air Compressor
Function: provide
compressed air source for the PSA oxygen generator, the flow and
pressure are to be decided by the desired oxygen flow rate, purity,
outlet pressure. As it is the air source of whole system, the
performance of air compressor has remarkable influence to the whole
oxygen generator system. Air source must be stable, sufficient with
pressure not less than 7.5 bars.
Compressed air treatment part
Function: get rid of
water, oil, impurities in compressed air coming from the air compressor,
providing clean, dry, oil-free compressed air for the PSA oxygen
generation part. It includes 3 filters, 1 refrigerated dryer and 1
activated carbon oil remover. After treatment, dew point of compressed
air can reach -20 degree (normal pressure) , dust content is not larger
than 0.01mg/m3, solid particles diameter is not larger than 0.01μ, oil mist content is not more than 0.003mg/m3.
Air tank
Air tank function:
It quickly increases the pressure of adsorber;
It also stores gas for air compressor, buffers system pressure;
Function:
It is the key part of
whole system. In this part, the oxygen is separated from compressed air,
sent to buffer tank as produced gas. Nitrogen, carbon dioxide,
argon,etc are discharge from muffler as exhausted gases. The efficiency
of this machine is mainly decided by adsorption tower structure, air
distribution structure, molecular molecular sieve performance, process
flow, etc.
O2 buffer tank function:
It balances pressure fluctuation, ensure stable oxygen supply;
With oxygen re-blowing system, the O2 buffer tank can also quickly increases the pressure of adsorption towers.
Function:
To help the performance of oxygen purifier, one oxygen storage tank is supplied.
Function:
This is another key part for the high purity oxygen generator. After its treatment, 99% purity oxygen is achieved.
Oxygen storage tank 2
Function:
After treatment of
oxygen purifier, the 98% purity oxygen has very low pressure, for
getting higher pressure, another oxygen storage tank is supplied.
Function:
As the 99% purity oxygen pressure is very slow, to get 150 bars pressure, one oxygen compressor is needed.
Oxygen filling station
Function
It is used to fill the high pressure oxygen into cylinders for storage or selling.
High purity Medical Oxygen Generator specification:
Oxygen purity: 99%
Oxygen flow rate: 5-100 Nm3/Hr
99% Purity Medical Oxygen Generator 99% Purity Medical Oxygen Generator,Hospital Oxygen Generators,Cylinder Filling Oxygen Generators Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com
Features:
* Customer friendly operation
* Best exterior construction and good appearance* Trustable highly precise metrology equipment
* High performance for electronic parts
* High quality explosion-proof motor with strong ability against power fluctuation
* Specially designed filtering systems with build-in re-cleanable filter
* With rich functions expansion like POS for smart card and bank card
* Flexible fuel application for gasoline, diesel, and kerosene etc.
* Works well in harsh conditions, like extremely cold, hot, humid, and sand-stormy environment
Optional Configuration:
Printer,IC card, ID card, communication for FMS, vapor recovery, break away,swivle, emergency stop, LED light,ect.
Technical specifications:
Accuracy for the unit
±0.25%
Flow rate
45Â ~80L/min
Ambient temperature
-25ºC~ +55ºC; -40ºC ~ +50ºC
Relative humidity
20% - 95%
Unit noise rate
< 70dB (A);
Inlet vacuum rate for  suction pump
>=54kPa
Communication
With RS 485 port, or current loop
Power supply
AC 220V(  -15%~+10%),(50/60±1)Hz ;
AC 380V( -15%~+10%); (50/60±1)Hz
Digit of sale
7digits (decimal points can be adjusted )
Digit of volume
6digits (decimal points can be adjusted )
Digit of unit price
5digits (decimal points can be adjusted )
Totalizer of sale
0~42949672.95Â
Totalizer of volume
0~42949672.95Â
/200
SK52Z/G/QF212B
1
2
4
2/side
1080*490*2193
265/280/223
SK52Z/G/QF222B
2
2
4
2/side
1080*490*2193
293/308/230
Z: Vane  pump  G: Gear pump Q: Submersible pump 
About Us
SANKI Group includes SANKI and WENDBELL, is the leading refueling equipment manufacturer and a Total Retail Solution Supplier in China. SANKI is located in Beijing Economic-Technological Development Area, the SANKI Factory is a state of the art high-tech facility, Delivering high Quality products and Solutions with Commitment, customization Flexibility and Total Cost Ownership.
SANKI specializes in the design and manufacture of total refueling solutions for the oil and gas industry, with wide product range that covers motor spirit and diesel dispensers, LNG/LPG dispenser, SF Tanks, Skid stations, Automatic tank gauging equipment, Fuel management system & tank calibration system.
All key components manufacture, such as flow meters, pumps, and the entire electronic head are designed and manufactured in house by SANKI in China. Sanki is also the only dispenser manufacturer to have an in-house electronics board manufacturing line within their local facility.
With a manufacturing capacity over 6000 unit per month, The SANKI sales and network covers over 40 countries around the word, including Eastern Europe, Russia, Australia, Asia, Africa & South America. Within China, Sanki is also one of 3 main suppliers to China's SINOPEC and PECHOCHINA Oil companies with more then 70 Sales and Support/Service centers and 67 authorized partners across China
.
Â
Trademark: SANKI
Specification: 1080*490*2193mm
Origin: Beijing Sanki
HS Code: 8413110000