Name: Xq0365 Double Hot Melt Toe Puff Laminating Machine Features  1.The machine is mainly used for hot melt toe puff laminating machine.  2.The material of sheeting tip can be pasted with vamp by pre-spraying thermoplastic glue or pre-spraying glue over ordinary material and coating with glue inside, then binding with vamp.  3.This machine adopts pneumatic driving and use upper and lower arc moulds to bind the vamp leather with sheeting tip. The binding shall be done after the inside is coated with glue and will make the vamp firmer after pressing.  4.The time and temperature of pressing can be adjusted upon the requirement of processed materials.  5.Under the lower mould, there is a small pole, which can conduct pressing by upper mould after the sheeting tip is pressed in alignment. This design can ensure accurate location of sheeting tip on vamp.  Parameter power 0.8KW power voltage 220V/1 PHASE/50Hz mode hot Capacity 1800pairs/8hours air consumption 52Lt/min net weight 100kg  dimensions 510*660*1630mm Sanitary Pad Production Line,Sanitary Pad Making Machine,Female Pad Production Line,Female Medical Pads Production Line GUANGZHOU XINGSHI EQUIPMENTS CO,.LTD. , https://www.xingshiequipments.com
