Iron Scoria Briquetting Press for Smelting

Do you work with steel in your manufacturing facility? If so, you know all about watching your expensive steel scrap, processing fluids and facility floor space disappear.
Whether it's turnings, chips, filings, shavings or sludge, a steel briquetting machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle.

We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
 

 

Do you work with steel in your manufacturing facility? If so, you know all about watching your expensive steel scrap, processing fluids and facility floor space disappear.
Whether it's turnings, chips, filings, shavings or sludge, a steel briquetting machine from ShengBo is the solution. Steel briquetting can double the value you get, cause steel briquettes are easier to manage, transport, sell and recycle.

We recommend you a fully-automatic steel briquetting line, with conveyor, bunker, elevator, etc. Our Y83W horizontal briquette machine has advantages as follows:
1) scraps length can be less than 10cm.
2) especially suitable for hard metal like stainless steel chips, grade 7 and grade 12 aluminum scrap, long copper chips, etc.
3) make storage area clean and green.
4) much lower than vertical one, suit the workshop with low height.
 

 

Dredge Turning Gland is a Trailing Suction Hopper Dredger component.

The dredge Turning Gland has a special particularity. Attached to the lower Suction Pipe the dredge turning gland allows a radial rotation in both directions of 15°. Due to this particularity the dredge turning gland enable the dredge Drag Head to follow the sea bottom without losing vacuum The dredge turning gland`s flanges are cast together with the body of the pipes and a rubber lip seal is used for the sealing of the dredge turning glands.

Material

Carbon Steel and Carbon Manganese Steel are the Materials used for the production of pipe and flanges of the dredge turning glands. Cast Iron is used for the production of the sliding pieces of the dredge turning glands.

Optimal operation and durability

Turning glands are designed to allow pipes and components to safely rotate around their axis, ensuring enhanced manoeuvrability and greater safety, even under heavy working conditions. They are available in three types.

ʉۢ Ball-turning gland with packing (BTG)

ʉۢ Disc-turning gland

ʉۢ Turning gland with rubber lip seal

Application

ʉۢ trailing suction pipes

ʉۢ unloading pipes

ʉۢ swivel and swan-neck bends in floating pipelines

ʉۢ components are able to rotate.

Turning Gland

Dredge Turning Gland,Joint And Turning Gland,Steel Turning Gland,Abrasion Resistant Turning Gland

Unisite Group Ltd. , http://www.unisitemarine.com