Landuse Type of Unit: Ordinary
Item: Hydraulic Pump Power Unit
Voltage:  12V DC Hydraulic
Kinds: Single Acting Pump
Trademark: VEVOR
Transport Package: Plyworthwood
Specification: 6L
Origin: China
Landuse Type of Unit: Ordinary
Item: Hydraulic Pump Power Unit
Voltage:  12V DC Hydraulic
Kinds: Single Acting Pump
Trademark: VEVOR
Transport Package: Plyworthwood
Specification: 6L
Origin: China
6 Quart Single Acting Hydraulic Pump 12V Hydraulic Power Unit Dump Trailer

  12V DC Hydraulic Single Acting Pump


This listing shows our brand new 12V DC hydraulic single acting pump with 6 litre reservoir from a dedicated supplier. If you finally choose to purchase from us, you will not only receive an incredible powerful unit, but you will also get brilliant after service. Our hydraulic pumps are some of the most reliable and durable units for industrial use with dump trailers, dump trucks, rv's, boat lifts, lift gates and a variety of other applications. Through external pipeline system, hydraulic pumps can be connected with several hydrocylinders to control multiple sets of valve movements. By applying standard components, these units are able to answer most application situations, thus reducing hydraulic component storage of customers to the minimum. This pump also features with a remote control so that it could be remote operated.

Application
  • Suitable for any work places where hydraulic pump is needed.
  • Widely used in steel construction, boiler making, construction works of fuel tanks and reactors, and factories including mines, smelteries, machine manufacturers and fitter factories.
  • Able to drive hydraulic punching machines and pressing systems.
Instructions
1. Hydraulic oil level: ISO4006(:99) 18/15 or NAS1638 9-10. If petroleum products is applied, please put into use after filtration of filter oil vehicle (10-25μm).
2. Hydraulic oil suggested: ISO VG22-46 (0ºC-70ºC), ISO VG15 (-15ºC-0ºC).
3. Supply voltage: 12V DC, ±10%.
4. Make sure hydraulic components including oil cylinders, oil tubes and joints are clean and inclusion-free.
5. Check immediately whether there is enough oil in the tank during first operation.
6. Replace hydraulic oil after first 100-hour usage. Replace every 3000 hour afterwards.
7. It's appropriate to fill 90% of the oil tank. Minimum amount should not be less than 85%.
 
Feature
 
 
  • Perfect for Dump Trailers-Lift Gates
  • Perfect replacement pump for 12V DC remotely controlled hydraulic systems 
  • Standard duty 12V DC Motor
  • Single acting power-up/gravity-down
  • SAE # 6 port, horizontal mount
  • Hand held pendant with 20 foot removal cord
  • Fluid choice determined by operating environment/temperature
 
Specifications
 
 
  • Pump Type: Hydraulic
  • Type: Single acting
  • Power Source: 12 Volt DC
  • Max. Relief Setting For Increased Lifting Power on A port: 3200 PSI 
  • Flow: 2.0 GPM
  • Reservoir Capacity: 6 Litre
  • Weight: 13.4kg
  • Top Diameter: 10.2cm (4")
  • Bottom Diameter: 16.5cm (6.5")
  • Pump Height: 49.5cm (19.5")
 
Package Content
 
 


· 12VDC Single Acting Power Unit
· 6 Quart Reservoir
· Remote controlled pendant
· User Manual
6 Quart Single Acting Hydraulic Pump 12V Hydraulic Power Unit Dump Trailer

  12V DC Hydraulic Single Acting Pump


This listing shows our brand new 12V DC hydraulic single acting pump with 6 litre reservoir from a dedicated supplier. If you finally choose to purchase from us, you will not only receive an incredible powerful unit, but you will also get brilliant after service. Our hydraulic pumps are some of the most reliable and durable units for industrial use with dump trailers, dump trucks, rv's, boat lifts, lift gates and a variety of other applications. Through external pipeline system, hydraulic pumps can be connected with several hydrocylinders to control multiple sets of valve movements. By applying standard components, these units are able to answer most application situations, thus reducing hydraulic component storage of customers to the minimum. This pump also features with a remote control so that it could be remote operated.

Application
  • Suitable for any work places where hydraulic pump is needed.
  • Widely used in steel construction, boiler making, construction works of fuel tanks and reactors, and factories including mines, smelteries, machine manufacturers and fitter factories.
  • Able to drive hydraulic punching machines and pressing systems.
Instructions
1. Hydraulic oil level: ISO4006(:99) 18/15 or NAS1638 9-10. If petroleum products is applied, please put into use after filtration of filter oil vehicle (10-25μm).
2. Hydraulic oil suggested: ISO VG22-46 (0ºC-70ºC), ISO VG15 (-15ºC-0ºC).
3. Supply voltage: 12V DC, ±10%.
4. Make sure hydraulic components including oil cylinders, oil tubes and joints are clean and inclusion-free.
5. Check immediately whether there is enough oil in the tank during first operation.
6. Replace hydraulic oil after first 100-hour usage. Replace every 3000 hour afterwards.
7. It's appropriate to fill 90% of the oil tank. Minimum amount should not be less than 85%.
 
Feature
 
 
  • Perfect for Dump Trailers-Lift Gates
  • Perfect replacement pump for 12V DC remotely controlled hydraulic systems 
  • Standard duty 12V DC Motor
  • Single acting power-up/gravity-down
  • SAE # 6 port, horizontal mount
  • Hand held pendant with 20 foot removal cord
  • Fluid choice determined by operating environment/temperature
 
Specifications
 
 
  • Pump Type: Hydraulic
  • Type: Single acting
  • Power Source: 12 Volt DC
  • Max. Relief Setting For Increased Lifting Power on A port: 3200 PSI 
  • Flow: 2.0 GPM
  • Reservoir Capacity: 6 Litre
  • Weight: 13.4kg
  • Top Diameter: 10.2cm (4")
  • Bottom Diameter: 16.5cm (6.5")
  • Pump Height: 49.5cm (19.5")
 
Package Content
 
 


· 12VDC Single Acting Power Unit
· 6 Quart Reservoir
· Remote controlled pendant
· User Manual

Various kinds of electric motor parts will be found in this area.Our products include electric motor housing, motor cover,electric motor frame,motor shell and so on. We can produce them according to customers' drawings specification or samples,with different materials, process and surface treatment.   Casting techniques: Sand casting, precision casting, die casting.  Surface treatment: Polishing, Power coated, Painting, Heat treatment, etc. The inspection reports will be along with the shipment. 

 Please send us the specification and drawings of your required parts, we will give you the best and competitive price . 

Aluminum Casting Electric Motor Parts

Aluminum Electric Motor Housing,Aluminum Motor Shell,Aluminum Starter Motor Housing,Aluminum Die Casting Electric Motor Parts,Die Cast Aluminium Motor Housing

Hebei Yuanda Casting Co.,Ltd. ,

Posted on