Large Capacity Copper Wire Crushing and Separating Machine

Copper Wire Crushing and Separating Machine Features:
The QJF series copper wire recycling line is designed for the efficient recovery of scrap from household communication cables, car cables, motor cables, and other industrial cables. The system includes crushing, separating, and a high-efficiency dust collection system to produce clean copper and plastic pellets.
Copper Wire Crushing and Separating Machine Introduction:
QJF-800 (capacity: 600-800kg/h) and QJF-1200 (capacity: 1500-2000kg/h) are complete processing lines suitable for large-scale factories. They consist of a first crusher, second shredder, separator, and dust collector, capable of handling larger scrap cables with high efficiency.

Copper Wire Crushing and Separating Machine Advantages:
1. Compact design, easy to move, and space-saving.
2. Low power consumption and stable performance.
3. Minimum copper recovery rate can reach 99%.
4. No water or dust, environmentally friendly.
5. Controlled by an electric control panel, highly automated.
Copper Wire Crushing and Separating Machine Application (Raw Materials):
Applicable cables: Waste communication copper cables, motor cable, car cable, industrial cable, household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm
If you're unsure if your cables are suitable for our equipment, you can send samples for free testing. TESTING IS FOR FREE!
Copper Wire Crushing and Separating Machine Components:
First crusher -- conveyor -- Second Shredder and Electrical Control Cabinet -- Separator and Dust Collector
1. This machine is used to recycle scrapped copper wires and cables such as automobile wires, telecommunication wires, and other kinds of copper wires to recover copper.
2. It consists of Crusher, Crushed Material Channel, Vibrating Separator, Air Blower, Dust Collector, and the Underbed, etc.
3. This Copper Wire Cable Granulator is specially used to process all kinds of copper wires and cables, like automobile electric circuit wires and communication cables, and other unclassified cables which cannot be processed by wire-stripping machines.


Copper Wire Crushing and Separating Machine Working Principle:
1. The first crusher of the recycling plant crushes the wires/cables into 10-20mm length.
2. By conveyor, crushed wires/cables are conveyed to the second crusher, which crushes them again into 3-5mm length plastic pieces and copper granules.
3. The mixture is sent to the vibration system. By airflow and vibration, plastic pieces are separated from copper granules thoroughly.
4. Copper granules and plastic pieces come out of the granulator from different outlets. Dust is collected by the dust collector through air ducts.


Copper Wire Crushing and Separating Machine Specifications: Copper Wire Crushing and Separating Machine Packing & Shipping:

FAQ
1. Is there quick-wear part on the machine?
The spare parts of the machine are blades and screens, which have a service life of more than 2 years. We also provide blade sharpening machines for maintenance.
2. What's the longest continuous working time for the recycling machine?
Normally 10 hours per day.
3. Is the machine easy to operate? How many workers required to operate it?
We design a precise but simple control system for the machine.
For a single recycling machine, only one worker is needed.
For a complete recycling line, two workers are required.

Contact information:
Attn: Tina
Mobile +86 159 8192 5357