Automatic spacer bending machine is a special equipment for making aluminum frames of insulating glass, which replaces the traditional fabrication technology. This equipment can make a variety of convex polygonal aluminum frames by one aluminum strip in one time, thus strengthening the strength of the aluminum frame, making the sealing effect of the insulating glass more better. Aluminum Spacer Bending Machine Spacer Bars Bending Machine,Usb Input Function Bending Machine,Fuji Servo Bending Machine,Automatic Bending Machine JINAN KATION TRADING CO.,LTD , https://www.machinerychinese.com
http://www.ruihui.net
The 3-in-1 feeder has high automation, flattening, good feeding precision, high synchronization performance, easy operation, great saving in labor cost and floor space, and has won the favor of more and more stamping customers. .
With the increase in demand, there are more and more manufacturers engaged in the production of three-in-one feeders, but the quality that comes with them has also been mixed, especially in design and production. problem.
The 3-in-1 feeder mainly consists of two major functional components: the rack part and the leveling feeding part, and the main problem in the design occurs in the leveling feeding part. The flattening feeding part of the 3-in-1 feeder includes the front feeding mechanism. , a middle leveling mechanism, a rear feeding mechanism, and a driving device.
Problem 1: In the three-in-one feeder drive device, the feed roller is generally controlled by the servo motor. Because the output torque of the servo motor itself is small and cannot meet the needs of use, a certain deceleration should be performed between the feed roller and the servo motor. In order to achieve increased use of the moment.
Problem 2: In the feeding process, in order to meet the accuracy requirements of the three-in-one feeder, it is generally required to set the positioning pin in the mold to eliminate the feeding error each time. Therefore, the feeding device needs to have a relaxing function at each feeding. After the step is completed, the feed roller needs to be relaxed to achieve repositioning of each product to eliminate the cumulative error of each feed.
Question 3: During the use of the three-in-one feeder, the power source used for relaxation is air pressure, and it is generally used in conjunction with the punching machine. It is inevitable that vibration will occur, and the three-in-one positioning due to vibration will often occur. The screw is loose and affects the leveling accuracy.
Therefore, the current method is to directly process the countersunk hole on the side plate at the end of the positioning shaft and the distance between the fixed side plates, or without the positioning axis. This method is not conducive to adjusting the positioning axis to eliminate the error.
Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6:Â Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD"Â for you and for us, so we have professional team work and production line can make nice quality in short time.
1. Â Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. Â After-Sales service:We have an efficient team to meet 24*7 all day service.
3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Â Engineers can provide service machinery overseas.
http://www.ruihui.net
The 3-in-1 feeder has high automation, flattening, good feeding precision, high synchronization performance, easy operation, great saving in labor cost and floor space, and has won the favor of more and more stamping customers. .
With the increase in demand, there are more and more manufacturers engaged in the production of three-in-one feeders, but the quality that comes with them has also been mixed, especially in design and production. problem.
The 3-in-1 feeder mainly consists of two major functional components: the rack part and the leveling feeding part, and the main problem in the design occurs in the leveling feeding part. The flattening feeding part of the 3-in-1 feeder includes the front feeding mechanism. , a middle leveling mechanism, a rear feeding mechanism, and a driving device.
Problem 1: In the three-in-one feeder drive device, the feed roller is generally controlled by the servo motor. Because the output torque of the servo motor itself is small and cannot meet the needs of use, a certain deceleration should be performed between the feed roller and the servo motor. In order to achieve increased use of the moment.
Problem 2: In the feeding process, in order to meet the accuracy requirements of the three-in-one feeder, it is generally required to set the positioning pin in the mold to eliminate the feeding error each time. Therefore, the feeding device needs to have a relaxing function at each feeding. After the step is completed, the feed roller needs to be relaxed to achieve repositioning of each product to eliminate the cumulative error of each feed.
Question 3: During the use of the three-in-one feeder, the power source used for relaxation is air pressure, and it is generally used in conjunction with the punching machine. It is inevitable that vibration will occur, and the three-in-one positioning due to vibration will often occur. The screw is loose and affects the leveling accuracy.
Therefore, the current method is to directly process the countersunk hole on the side plate at the end of the positioning shaft and the distance between the fixed side plates, or without the positioning axis. This method is not conducive to adjusting the positioning axis to eliminate the error.
Q1:What kinds of machines do you have?
Our main products are:Nc Servo Roll Feeder,Uncoiler, Straightener, 3 in1 Straightener Feeder,Transfer systems,Press Feeding Line., etc
Q2:Is your equipment standard or customized?
Both, we can OEM & ODM with customers.
Q3:What are your equipments certification?
All our items are coming with CE certifications.
Q4:How did your company's quality system work?
"QUALITY IS OUR CULTURE" Our quality is not the best in the world, and the price is not the cheapest. But we can provide you excellent products to defeat your competitors.
Q5:How long is the warranty period of the machine?
We offer free service with a warranty period of one year, If it is operate in reasonable, the machine can be used more than 10 years.
Q6:Â Is it possible to be a foreign agent and distributor?
If you are confidence and excellent service for after-sales, then welcome to be our agents or distributors all over the world.
Q7:What's your payment?
T/T,D/P,L/C,Western Union., etc
Q8:What's the delivery?
"TIME IS GOLD"Â for you and for us, so we have professional team work and production line can make nice quality in short time.1. Â Pre-Sales Service:We have professional designers to meet the different requirement of our customers.
2. Â After-Sales service:We have an efficient team to meet 24*7 all day service.
3.  Full-Service:Actively cooperate with customers to deal with problems in equipment using.
4. Â Engineers can provide service machinery overseas.
Trademark: RUIHUI
Transport Package: Wooden Box or Vacuum Packing
Specification: 3800*3300*2750mm
Origin: China, Dongguan
Trademark: RUIHUI
Transport Package: Wooden Box or Vacuum Packing
Specification: 3800*3300*2750mm
Origin: China, Dongguan
3-in-1 feeder, material leveling and feeding equipment, punching automatic feeding (MAC3-400)
3-in-1 feeder, material leveling and feeding equipment, punching automatic feeding (MAC3-400)