For the purchase of powdered material transporter, the best choice is better than the best one. We need to choose according to the demand and we will be satisfied with it. The powder material transporter chooses different tank types according to different usages, and finally chooses The product purchased will be our favorite one. Powdered material transport vehicles can be divided into the following four types according to their tank types: 1, vertical powder material transporter The centerline of the tank body of the vertical powder material transportation vehicle is vertical. The vehicle can carry one or more vertical tanks. The vertical powder material transporter has a wide range of applications and can be used for the bulk transport of various powder and granular materials such as powders and aggregates. However, the center of gravity of the entire vehicle is high, and when multiple tanks are used, the structure is complicated and the manufacturing cost is high. 2, horizontal powder material transporter The centerline of the tank is horizontal. The tank can be a single tank or two tanks. If the fluidized bed in the tank is at a dip angle from the horizontal plane, it is called an inward horizontal powder material transporter. If the centerline of the tank body is at a slight angle to the horizontal plane, it is an outwardly inclined powder material transporter. The horizontal powder material transportation vehicle has the advantages of simple structure, convenient operation, stable unloading performance and low center of mass, but its applicability is limited, and it is generally only used for powder bulk transportation with better fluidization performance. 3, lift type powder material transporter When the lift type powder material transport vehicle is loaded and running, the centerline of the tank body is in a horizontal position. When the material is lifted, a lifting mechanism is used to lift the front end of the tank body into an inclined state. The bottom of the tank of the lift type pulverized material transporter is usually provided with a fluidized bed only at the discharge port, and the discharge into the tank body is in a tilted state. The powder particles automatically fall down under the action of gravity and are concentrated at the discharge port. Discharged after office. Therefore, the internal structure of the can body is simple, the volumetric efficiency is high, and the application scope is wide. It is commonly used to load the powder material with poor fluidization performance. However, due to the increase of the lifting mechanism, the use and maintenance are complicated. 4, bucket type powder material transporter The tank body of the bucket type powder tank car is composed of a straight cylinder or a rectangular cylinder with a horizontal centerline and a cone cylinder perpendicular to the centerline. Bucket type powder material transport vehicles usually do not have a fluidized bed, and use the gravity of the powder material to automatically discharge material. Therefore, it has a simple structure and a wide range of applications. The remaining amount is small, the tank is easy to clean and so on. Railway Accessories,Turbine Wheel For Locomotive Turbocharger,High Quality Axle Box,Railway Freight Car Fittings A&M Manufacturing Co.Ltd. , https://www.am-casting.com
A&M Manufacturing Co., Ltd. offers almost all types of railway components, railway components, railway wagon components or railway castings manufactured by casting or forging processes.
The materials of these railway castings are mainly carbon steel or stainless steel or ADI-isothermally quenched ductile iron, which are cast by electric arc furnace casting process or Lost Wax Casting. These railway truck components include axle boxes, railway couplers, railway bogies, bogie bolsters, bogie frames, brake block brackets, and motor housings.
We can supply a variety of railway components according to customer requirements.
Material: Various materials such as steel and iron.
Standard: GB, TB, AAR, etc.