The overall structure of Cheng Li's side-mounted compression garbage truck

The side mounted compression type garbage truck is a kind of garbage truck and is a structure of a side loading garbage truck and a compression garbage truck. The side-mounted compression type garbage truck is used to lift the trash can automatically into the garbage through the rod, and push the garbage behind the carriage to achieve the purpose of compressing the garbage. The compression principle is the use of mechanical, electrical, hydraulic linkage control system, computer control and manual operation In the system, garbage is poured in by means of fillers, push shovels, etc., crushing or flattening, and the waste is squeezed into the carriage and compacted and evacuated. Its characteristics are: large compression ratio, high load: large crushing pressure of 12 tons, loading equivalent to two and a half times the same-ton non-compressed waste.

The major difference between the side-loading garbage truck and the rear-mounted garbage truck is the loading method. The former is a side-mounted device. The trolley can be automatically dumped into the trash by pulling the rod, and the garbage can be pushed to the rear of the compartment to achieve the purpose of compressing the garbage. The latter is loaded into the rubbish from the back through direct loading or manual input, and pushes out rubbish in front of the car to achieve the purpose of compression. The unloading methods of the two compression garbage trucks are the same, and they are all achieved through the pushing disk in the compression box. The trash in the roadside bin can be collected in the bin, and the garbage truck can be compressed into a block transport by the rear compression device, saving the garbage volume.

Side compression type garbage truck use

1. Automatically feed the trash cans of different specifications into the compartment

2, the car roof door automatic drive opening and closing;

3, the rear door automatic rotation drive opening and closing;

4. The pushing board in the compartment can squeeze the garbage and increase the load of garbage;

5. The carriages are lifted in parallel and can be docked with various types of compression trucks. The garbage in the carriages is pushed into the compression mechanism of the compression vehicle for compression to avoid secondary pollution in the transit process.