The upper jump of the cone crusher is an abnormal phenomenon, which must be carefully analyzed and taken out. However, when taking the discharge measure, do not compress the spring, because the wrong compression spring will not work properly, but the damage of the part may occur, mainly because the compression spring will cause the crushing force to increase. The main reasons for the upper part of the cone crusher are the following: 1. The ore is uneven or the ore is too much; 2. The ore contains too much small pieces and powdery ore or excessive humidity; 3. The gap in the discharge port is too small. In the case of the normal operation of the cone crusher, when there is a beating phenomenon in the upper part, it must be carefully analyzed to find out the direct cause of the upper part of the cone crusher, and take corresponding measures for treatment.
Co2 Laser Engraving Machine is Co2 laser glass tube as an energy source, combined with electronic, mechanical, computer technology,developed. Laser head and the workpiece does not contact, do not scratch the surface, the kerf, high precision, is the best choice for a variety of processing industries such as advertisement, arts and crafts, leather, toys, garments, model, building upholstery, computerized,embroidery and clipping, packaging and paper industry. It can work with wood, bamboo, jade, marble, organic glass, crystal, plastic, garments, paper, leather, rubber, ceramic,glass and other nonmetal materials.
Co2 Laser Engraving Machine,Laser Cutting Machine For Acrylic,Stone Engraver Machine,Paper Laser Cutting Machine Shandong Meiman Laser Technology Co., Ltd. , https://www.meimanlasers.com
When the cone crusher is working normally, many operators will ignore the phenomenon of the upper part of the cone crusher. It is believed that the cone crusher will certainly shake when it is in operation, and the upper jump is also a normal phenomenon. This idea is wrong.