Dongfeng Road Sweeper is a new type of high-efficiency sweeping equipment that integrates road sweeping, garbage collection and transportation developed and designed by special vehicles. Simply put, it is to modify the sweeping function of the road sweeping function on the chassis of special purpose vehicles. In addition to the chassis engine, the vehicle is additionally equipped with a secondary engine. Four sweeping brushes are driven by hydraulic motors, with fans, dustbins, and water tanks. Grouped equipment. This brand-new model can be used to clean floors, clean roads, clean roads, clean and clean roads, and sprinkle water on the ground after cleaning. It can be used to clean various climates and dry roads. Car Interior And Exteriors Parts Car Interior And Exteriors Parts,Auto Part Roof Antenna, Rear Bar Tow Hooks,Racer Rear Mudguard Dongguan Jiaxing Precision Machinery Co., Ltd. , https://www.jiaxingmachinery.com
It is generally classified by walking mode, operation mode or dust removal mode, and is usually classified by operating mode:
1. Hand-push sweepers and walk-behind sweepers
2. Self-propelled sweeper
3, pure sweep sweeper
4, suction sweeper
5, pure suction sweeper (multifunction full suction sweeper)
6, dry sweeper (dusting vehicle) 7, wet sweeper 8, full suction sweeper
Steps for usage One: Sweeping work 1 Turn on the power of the control box and point the control valve to the position of the secondary valve
2 Start the auxiliary machine
3 Turn the slave clutch control button to the closed position and the fan starts to work
4 Point the vacuum box control to a lowered position
5 Point the left or right control to the down position
6 Turn the left or right rotary control to the forward position (count clockwise in the left and counterclockwise in the right)
7 Point the left spray, right spray, and rear spray water control knobs to the open position
8 Point the pump control knob to the open position
9 The vehicle travels at the appropriate speed and starts cleaning action 2: The end of sweeping 1 The vehicle stops driving
2 Point the Pump Control, Left Spray Control, Right Spray Control, Rear Spray Control to Off Position
3 Point the broom control to the middle
4 Point the swash plate control to the ascending position and then to the middle position
5 Point the vacuum box control up and then on the middle
6 Point the secondary engine clutch control knob to the sub-position and then to the middle position
7 Point the control valve control button to the middle position
8 Shutdown the secondary engine
9 Turn off the power to the control box. 3: Unload the trash 1 Turn on the power to the control box, and point the control valve's control button to the position of the main valve.
2 Start the vehicle's main engine
3 Depress the vehicle clutch
4 Open the vehicle's additional oil pump clutch switch (pull outward)
5 Loosen the vehicle clutch at an appropriate speed
6 Point the rear door control knob on the control box to the open position, and then to the middle position after 5 seconds
7 Point the car control button to the up position, and point the control button to the middle position at any time according to the inclination of the car. At this time, the car tilts up and stops.
8 Garbage Cleaning
9 After the garbage has been cleaned, point the control box to the lowered position. After the carriage fully returns, position the control button at the middle position.
10 Point the rear door control to the off position, and then to the middle position after 10 seconds
11 Clean up the end of rubbish
12 Depress the vehicle clutch
13 Close the additional pump clutch control knob (pull inwards)
14 Loosen the vehicle clutch at an appropriate speed
15 Point the control valve of the control box to the middle position
16 Switch off the control box