HS Code: 84779000
HS Code: 84779000
Production Description

Technical Index:
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm

Material :quality alloy steels

1.38CRMOALA
2.SKD61
3.stainless steel
4. Bimetallic 

Supply Capacity:
Production Capacity: 1500 sets/month 
Packing: Fumigation wooden case 
Delivery Date: 30~40 days

The product specification

Screw: 15 mm in diameter-250 mm diameter screw

Screw length: 300 mm to 8000 mm screw length

Machine tube diameter 40 mm to 400 mm: barrel outer diameter

Length-diameter ratio: L/D: 10-46



Product Display
Screw Barrel for Plastic Process for Injection Molding Machine



Screw Barrel for Plastic Process for Injection Molding Machine


Equipment Display
Screw Barrel for Plastic Process for Injection Molding Machine



Packing&Delivery
Screw Barrel for Plastic Process for Injection Molding Machine



Contact Us
Screw Barrel for Plastic Process for Injection Molding Machine


 

Production Description

Technical Index:
Depth of Nitrated Layer:0.5~0.8mm
Hardness of nitration: 950~1100Hv
Fragility of nitration: Less than grade 1
Surface Hardness of Nitrated Cr coating layer: 950Hv
Hardness of Bimetallic Layer: HRC55~72
Thickness of Cr-coating Layer: 0.03~0.08mm
Depth of Bimetallic Layer:>2mm

Material :quality alloy steels

1.38CRMOALA
2.SKD61
3.stainless steel
4. Bimetallic 

Supply Capacity:
Production Capacity: 1500 sets/month 
Packing: Fumigation wooden case 
Delivery Date: 30~40 days

The product specification

Screw: 15 mm in diameter-250 mm diameter screw

Screw length: 300 mm to 8000 mm screw length

Machine tube diameter 40 mm to 400 mm: barrel outer diameter

Length-diameter ratio: L/D: 10-46



Product Display
Screw Barrel for Plastic Process for Injection Molding Machine



Screw Barrel for Plastic Process for Injection Molding Machine


Equipment Display
Screw Barrel for Plastic Process for Injection Molding Machine



Packing&Delivery
Screw Barrel for Plastic Process for Injection Molding Machine



Contact Us
Screw Barrel for Plastic Process for Injection Molding Machine


 

The Water distributor is designed for industrial or commercial water treatment and wastewater treatment systems. And it's suitable for diameters from 8 "to 96" pressure vessel. It is made of high quality ABS synthetic resin with sufficient strength. The unique design ensures the entire uniformity of the flow velocity distribution in presure vessel. What's more, the special design avoid the occurrence of short circuit. By the way, the rational design of opening the slit also ensures a minimum pressure requirements.Widely used in water treatment field,mainly installed in filter tanks

Water Distributors

Water Distributors,Top Mounted Water Distributor,Threaded Type Water Distributor,Adjustable Water Distributors

Zaoqiang Yaxin Environmental Protection Equipment Co., Ltd. , http://www.yaxinenvironment.com

Posted on