Air Cooling Conveyor
1.Application:
3.Machine Picture:
4.Our Advantage & Service:
-Technical Support Online Service Provided
-On-site Training Service Provided
We can supply all Powder Coating Raw Materials( polyester resin, epoxy resin, barium sulfate, gloss agent and so on) in the formulation.
Powder Coating Air Cooling Conveyor,Wind-Cooled Cooling Crusher System,Powder Coating Air Cooling Band ,Air Cooling System Yantai Yuanli Corp Ltd , https://www.yuanlicorpcn.com
Manufactured in Xiamen, China, these high-pressure air pushing bags are designed with advanced materials and specialized techniques to ensure durability and minimal risk of rupture or damage. They are ideal for splitting stone blocks after wire saw cutting in quarries, offering a safe and efficient alternative to traditional methods.
a. Operating Procedure for Splitting and Overturning Air Bags
1. Before deploying the air bag, carefully remove any debris from the edges of the stone block to prevent damage.
2. Refer to the thrust table to determine the type and number of air bags required to create a 15cm gap between the sawn block and the quarry wall.
3. Secure one end of two pull-back ropes to the rings on the top edge of the air bag and tie the other ends to fixed points.
4. Connect the air supply through a pressure gauge tube to the air bag.
5. Begin inflation by opening the ball valve connected to the bag.
6. Continue inflating until you achieve an opening of 10-15cm, then place suitable metal wedges under the stone block.
7. Overlap the air bags as needed to fully overturn the block.
8. Close the air inlet valves for each bag, disconnect the hoses, and once deflated, carefully pull out the air bags.
b. Technical Specifications
Model
Specification
Theoretical Pushing Capacity
Weight (kg)
BL1010
1.0m × 1.0m
50 Tons
4.5
BL1015
1.0m × 1.5m
75 Tons
6.8
BL1020
1.0m × 2.0m
100 Tons
9.0
BL1515
1.5m × 1.5m
115 Tons
10.2
BL2015
2.0m × 1.5m
150 Tons
13.5
BL2020
2.0m × 2.0m
200 Tons
18.0
BL3030
3.0m × 3.0m
450 Tons
40.5
Control Platform
Air Pressure: 0–6 bar, 3 Outlets
30.0
Generally is used in powder coating production line to cool the extruded material. An stainless steel caterpallar along with cold air solidfy melted material and lead them to crusher at the end of the cooling band.
Flakes can be adjusted from 1-3mm in thickness and 5-10mm in width.
2.Main Characteristic:
1. Cooling roll has been designed specially to max. cool efficiency
2. Hard chrome plated cooling roll
3. Cooling roll and crusher equipped with overloaded alarm and protection system
4. Chain anti distortion system
5. Reverse motion possibility for emergency case
According to customer's requirement, we provide layout (plant designer), excellent mechanical engineer, excellent electrician, etc.
In customer factory, we provide all kinds of training, including installation, commissioning
-Long-term Maintenance Provided
In the area of maintenance, we offer needs-oriented and standardized maintenance packages, such as the overhaul of components, gearboxes, in order to guarantee the safe and economic operation of plant and machinery.
-Spare Parts Replacement and Repair Service Provided
Providing spare parts for all kinds of Powder Coating processing equipment in long-term. And can provide tailored made spare parts according to customers' requirements. Ensure advanced craft, good material and high precision.
-Formulation Provided (our advantage):
Some customers are worried their final products if can get best result, we have our own formulator (Engineer for powder coating formulation) who is testing and updating the formulation according to customer requirement all the time. And have very good experience for the formulation to support customer to make different effect powder coatings.
Model NO.: BL1010, BL1015, BL1020, BL1515, BL2015, BL2020, BL3030
Stock: Available in Sufficient Quantity
Size: Multiple Sizes Available to Meet Different Needs
Type: Italian Model EV Series
Pushing Power: 20 to 200 Tons
Trademark: BESTLINK
Transport Package: Plywood Packaging
Specification: CE and SGS Certified
Origin: Xiamen, Fujian, China
HS Code: 39269090
Bestlink High Pressure Safety Air Pushing Bag for Marble, Granite, and Quarry Applications