Asian Engine Emissions Forum Discusses National IV Diesel and Urea Use Topics

On March 25, 2014, the 7th Asian Engine Emission Summit was held at the Grand Hyatt Beijing. The meeting will last for three days.

On the first day of the conference, we conducted hot topics such as the Air Pollution Prevention Plan, the outlook of China's commercial vehicle market, and the market response of the industry to stringent emission regulations, the major real-world challenges of motor vehicle emission reduction, and the best application of energy-saving emission reduction for heavy-duty commercial vehicles. Explore. It is understood that the forum will cover the latest developments in motor vehicle emission regulations and implementation plans, further implement the challenges of laws and regulations, and analyze market development strategies. The discussion focused on the key issues of reducing emissions from roads, non-road mobile machinery and diesel vehicles in the Tim Blue area. This will help key industry chains respond to stricter diesel emission regulations, seek solutions to the increasingly serious air pollution problems in Asia, and recommend cost-effective solutions.

2017 full coverage of the national four diesel

For everyone's concern about the supply of diesel fuel to the National IV, the relevant personnel of the Petrochemical Research Institute of China National Petroleum Corporation stated that at present, the refining of hydrocracked diesel in China Fourth Diesel is a key and difficult task, and it effectively improves the ability of diesel cleaning. It has the closest connection with the National IV, but the domestic hydrogenation technology equipment needs to be improved. From the hydrogenation plant equipment that has been put into operation, the supply of the National IV diesel has no problem, and most of the domestic areas have begun to supply the National IV diesel. At the same time, PetroChina intends to carry out a comprehensive upgrade of 18 sets of diesel hydrogenation plants to meet the requirements of the State's four-country production of the five diesel fuels. In 2017, it will be able to achieve full coverage of the National IV diesel.

At the same time, related personnel stated that oil products can also be handled in the following ways:

First, optimize crude oil resources, increase production of diesel fractions, develop hydrogenation technologies, and respond to market demands.

Second, adjust energy consumption structure, limit the inefficient processing of crude oil, require enterprises to save energy and reduce consumption, encourage green travel, and jointly prevent and control air pollution

Hot Discussion on Vehicle Urea Problem

In the forum discussion, the supply of vehicle urea, filling, storage and other issues have aroused widespread concern. Wu Jiangtao, the general manager of Sichuan Meifengjia Blue Environmental Technology Co., Ltd., took care of the issues that people generally care about. The answer, he believes that the US Fengjia blue products can meet the market supply issues, while the filling methods include barrel filling, IBC filling equipment, armored filling equipment and custom packaging, for the current truck driver group, the most The most efficient and convenient barrel filling becomes the driver's first choice.

 

It is understood that on the relevant issues related to car urea will also have a detailed special presentation on the third day of the meeting on March 27, and the China Truck Network will also pay full attention to it.

It is reported that the assembly brings together key legislative officials, OEM and chief engine experts, and gathers industry-leading technology suppliers to implement, implement and progress the industry market after the buffer period of the Fourth National Regulation; "Euro 6" emission regulations and technical requirements. And optimization of the technical route, the upgraded version of the "Euro 6" emission test cycle, SCR + EGR, OBDII and DPF; fuel standard consumption limits; AdBlue GB identification and supply and other topics discussed.

Flatbed Laser Cutting Machine

Flatbed Laser Cutting Machine

UTECH flatbed laser cutting machine works with high power Co2 laser tube, with function of cutting and engraving. Laser tube moves following the design of files, without power wasting, keeping machine work with same power on each position of working table. It gives better engraving and cutting result.

Large format could be used in many industry lines like acrylic cutting, fabric cutting, etc; it can also work well in aircraft engraving &designing, toy making, and many other non-metal materials.

>> Machine Features >>

1. CO2 Glass sealed laser tube
China famous brand (Reci, Yongli), good beam mode stability, service time over 1500~8000 working hours.
2. Laser Power
40W~180W, good quality and stable output to extend the laser tube service time.
3. Singapore imported lens and mirrors
High transmittance, good focusing, reflecting effect.
4. DSP control system, Leetro Controller
Ruida USB controller. USB interface, support online/offline working, English language system, adjustable cutting speed and power.
5. High accuracy stepper motors and drivers. Belt transmission
6. Aluminium blade table
7. Taiwan Linear guide rails
8. Lasercut 5.3 software, user`s manual
9. Tool box

>> Equipment coming together with machine >>

1. Industrial Cooling System
Constant water temperature ensures laser tube a longer service time and high stability
2. Exhaust Fan
Exhaust fan removes dust and smoke to protect the optical parts and the users.
3. Electromagnetic air pump
The air blowing protects the lens from smoke and dust pollution. Also it protects the material being processed from fire or burned.

>> Options >>

1. Red dot
The laser is invisible. Red dot shows the position of the laser on the material. It's more convenient for location.
2. Honeycomb or blade table optional
Aluminum blade table is for processing acrylic, wood and other hard materials;
Honeycomb table is for processing cloth, leather and other soft materials.
3. Up/down Z-axis
You can adjust the table height by operating the Z-axis to process thick materials. Z-axis is also a must when you need to use auto focusing and rotary.
4. Auto focusing
Auto focusing automatically adjust the focusing distance.
5. Rotary
Rotary is used when processing cylindrical objects like bottles, cups, sticks, etc.

>> The functional of optional spare parts>>

1. up and down platform: to process more thickness materials,above 5cm;
2. Rotary device:to engrave cylinder object
3. Auto focus: to check the focal length automatically
4. Red dot point: to see the sight of laser light
5.Chiller cw-3000/5000/5200: to cool the laser tube better, so that extend lifespan of it
6. Dual heads: to improve the working efficiency

<

Flatbed Laser Cutting Machine,Flatbed Co2 Laser Cutting Machine,Flatbed Laser Cutter,Metal Flatbed Laser Cutting Machine

Shandong U-May CNC Technology Co., Ltd. , https://www.fiberlasers.de