Causes of Vibration of Soda-Hyster Heater and New Processing Ideas and Methods

This week in the Ximen electromechanical conference room, the training of “Caustic Hybrid Heater Vibration Causes and Treatment Methods” was held. The production technology department director Wang Feihong gave a lecture. The training first talked about several recent classic cases where the company dealt with the solution of soda hybrid heater vibrations, conducted in-depth analysis of the causes and treatment of vibrations, put forward new ideas and solutions, and benefited us greatly, especially for new employees. . This training will help improve the staff's ability to solve customer problems and help improve customer service. The following is a compilation of Xiaobian’s training content according to Minister Wang’s training content for your reference.

The soda steam heater vibration causes and treatment classic case

1. Gwette - Changling Refinery Production Process Water Model: JRG-250-120G
Description of the problem: The DN40 bypass pipe opens a little and causes vibration. Cause analysis: The steam pipe is too small to meet the design usage. Solution: Close the bypass, slowly open the main steam pipe valve

2, Zhang Xia water supply - Hebei Jinmailan dry noodles Model: HQS-300-420
Problem Description: Vibration Analysis of the Cause: The actual flow of water used is much smaller than the designed flow. Solution: At least 2 pumps are turned on and all valves are open.

From the above two cases, our products are no problem, but in the actual use of the process, their parameters have changed, such as the amount of steam deviation from the original determination of the selected amount is too large, or the water flow does not match the design at that time, This is very easy to produce vibration. For example, China Telecom Jia in the selection requirements: winter, 400t / h, temperature rise 18-20 degrees, summer, 140t / h, temperature rise 8-10 degrees, like this difference in water flow and temperature is too large, a soda mixed Heaters cannot meet the needs of these two quarters at the same time. If they are used forcibly, vibrations will occur and they will not work properly. Therefore, when the buyer selects the type of the soda-mixed heater, he should fully inform the site of the parameters and requirements to facilitate the selection of the right type of technicians, thereby reducing or avoiding the vibration of the soda hybrid heater.

The Minister Wang of the Ministry of Technology also emphasized that in the after-sales process of the soda-mixed heaters, it is necessary to proceed from the entire system and not just the products themselves. In order to reduce the vibration, we should pay attention to the pre-selection, understand the actual use of parameters, select the right type for customers.

Hunan Ximen Electromechanical has been engaged in the production and sales of the soda-hybrid heater for 23 years. It has sold over 10,000 sets of heaters, has a strong technical team, and provided free heating system design solutions for a long time. Welcome to inquire.

Click to understand>> Soda mix heater details

all rights reserved: Simon Electric , please indicate the source.