With the development of modern machinery processing industry, the requirements for the quality and precision of cutting have been continuously improved, and the requirements for improving production efficiency, reducing production costs, and having high-efficiency automatic cutting functions are also increasing. As a part of the cutting machine industry, the products we provide will be the most modern and technological. Welcome everyone to discuss cooperation. Details:/ Wear Testing Machine,Gear Wear Testing Machine,Fzg Gear Wear Tester ,Fzg Gear Wear Testing Machine Jinan Chenda Testing Machine Manufacturing Co., Ltd. , https://www.jncdtester.com
For non-closed state cutting graphics, first of all, it is impossible to pass the process design. However, in the actual use process, the problem of cutting is not closed. The main reason can be summarized as two major aspects of hardware and software, in which the hardware failure is relatively simple. Incomplete cutting torch operation is the fault of the drive motor in most cases. The relevant processing methods are also very direct, replacing or repairing the walking motor. If the hardware is excluded, the software failure is related to the CNC system. The main reason is that the CNC system The software does not have cumulative error correction. For users to quickly understand whether the purchased CNC system has the above functions, the detection methods are described as follows: (China Cutting Machine Trading Network)
In order to detect the accumulated error correction function of the CNC system software, the NC code can be converted into AutoCAD graphics. Then, under AutoCAD, it is checked whether the introduction of the closed contour and the end point of the lead line are completely coincident, if they are completely overlapped (contour closed). Accumulated error correction technology is available. If it is not closed, the process can be compiled. The system will automatically prompt us that the graph is an unclosed graph. At this time, you only need to make a 0.5mm lead-in, then set the parameters and output the graph. Transmitting to CNC flame cutting machine can complete the cutting.
ã€China Cutter Trading Network is now giving back to the old and new members, special advertising space for free experience activities, a golden opportunity, first come first served. Log on to the official website for the latest information:/
Editor: zgqgjjyw