Wireless bridges are best for one-to-one connections, with the best loss and best data transmission. However, when there is a need for one-to-many at some times, there are some issues that need attention. Feng Runda, a professional wireless bridge and solution provider, summarized the following points for reference.
1, to ensure that one-to-many wireless transmission must use a webcam, traditional analog devices can not do one-to-many transmission, but only suitable for one-to-one transmission.
2, one-to-many, as the name suggests to correspond to multiple transmitters, and the transmitter is usually connected to the front camera. When designing a one-to-many system, it must be noted that the angle between the two transmitters should not be too large, and it is usually kept at about 20 degrees. In addition, the transmission distance between the transmitting end and the receiving end of the front end cannot be too far. Sometimes, due to environmental restrictions, it is necessary to be too far away. At the very least, the transmission link must be ensured on the same line. Otherwise, the stability of the transmission picture quality cannot be ensured.
3, when doing one-to-many, naturally consider the issue of transmission bandwidth. When using a camera, it is better to plan what pixel camera is appropriate. After all, if the wireless bridge's own transmission rate is not so large, if the pixels of the camera are too large, it will easily cause the transmission to be unstable and even unable to fully transmit the scene.
4, if the distance between the monitoring points are relatively close, the transmission distance is less than 800 to 1000 meters, consider omnidirectional reception.
5, when one-to-many, the wireless bridge requests the channel to be the same when setting up, and input the MAC address of each other in WDS, and close the DHCP service of B router.
The above is a few things that need attention in the setting of one-to-many wireless bridges. It is not difficult to understand it. In general, it is necessary to pay attention to the transmission distance and the transmission bandwidth, and the smoothness of the transmission channel. The problem, of course, is the flexibility to adopt a variety of appropriate equipment based on site conditions.

8890

Product introduction

WeMainly used for 0.5 ~ 25 mm size fractions of coal or coal dewatering, maximum size should be.

Type meaning

T L L - 1000

T:DEHYDRATION

L:VERTICAL CENTRIFUGER

1000:SCREEN MESH BIG END DIAMTER

Oder information

Specify the equipment specifications;
Specify the screen gap size, does not indicate the supply according to 0.5mm;

Another order spare parts;

number

 

1

model

 

LL3 --9

conjugate

mm

930

interval

mm

0.5

Rotate speed

rmp

562

Rotor speed

mm

554

granularity

 

0.5~13

moisture

 

18~30

Product external moisture

 

5~8

power

kw

45

Motor power

kw

0.75

size

mm

2785*2045*22

weight

ton

6.7



Company IntroductionQM


Luoyang Hong Xin Heavy Co., LTD. is located in Luoyang Xin'an Industrial Park, Luoyang Hongxin Heavy Machinery Co., Ltd is an enterprise featured with industrial designing, processing and manufacturing, which is qualified for import-export trade. Covering an area of 15,000 square meters and holding an annual production value of 80 million RMB, the company of 20 million RMB registered capital has total 100 staff members, among which there are 20 engineering technicians owning senior and medium professional titles and 40 intermediate and senior technicians capable of product designing and developing.

Hongxin is dedicated to produce reducers, hoists, crushers, Ball Grinding Mills and the equipments of screening, coal washing, metallurgy and cement, and replacement parts. Meanwhile, we provide the perform maintenance service for various series of equipments. There are 52 large-scale equipments applied into the manufacturing process, such as T200 CNC floor boring and milling machine, YK 73125 CNC molding gear grinding machine, YK322B CNC molding gear grinding machine, Y3200 gear hobbing machine, Y1600 CNC gear sharper, 4m vertical lathe, 6.3m CNC vertical lathe, T110 CNC boring machine, and 52 middle-sized productive and assistive equipments, which integrate strong manufacturing and processing capability with complete managing system of production and technology, quality management system and comprehensive testing measures.


Certificates

zz



Contacts

DoraPhoebeKrisVickyying



Centrifugal Dehydrator

Centrifugal Dehydrator,Commercial Centrifugal Dehydrator,Centrifugal Dehydrator Machine,Industrial Centrifugal Dehydrator

Luoyang Hongxin Heavy Machinery CO., TLD. , https://www.hxreducer.com

Posted on