What conditions must be met for tanker production?

The products transported by tanker trucks are special products that belong to dangerous chemicals. Therefore, their transportation requirements are relatively high. In order to ensure the safety of drivers in the transportation process, the state has made some relevant safety regulations for tanker trucks, refuelling trucks, and oil tankers. Next, let Xiaobian introduce the requirements of the national regulations that 2 tons of tanker trucks must comply with What are the relevant conditions?

1. The tanker must have a reliable grounding device and a conductive path protection device formed by the tanker and the liquid receiving equipment when operating the tanker.

2. The connection between the electrical components and the conductors of the tank truck must be reliable and the shielding is good. There should also be explosion-proof measures.

3, the tanker should be equipped with measures to eliminate static electricity and fire, the tanker tank body also need to set the static elimination device.

4. The metal piping of oil tankers should pay attention to the conductive sheet between the two points and between the pipeline and the tank body, and the chassis and the tank body. The conductive pipe should be located between any two points or any point of the pipeline to the grounding point or the internal guide of the tank body. The resistance of the two ends of the hose at any point on the electrostatic component shall meet the relevant national standards: GJB406 requirements (ie no more than 50Ω).

5. The exhaust pipe of the tank car engine is a front-mounted structure and should be equipped with a fire cap during use to prevent accidents. The tanker must also be equipped with a fire extinguisher as an essential safety measure.

6. Both sides of the tank car should have catchy words (such as “no smoking”) or other obvious signs to prevent fire, reminding people that the car is transported by inflammable and explosive products.

Only by strictly following the relevant conditions stipulated by the state to produce 2 tons of tanker trucks , 2 tons of tanker trucks can be driven on the road. Only by keeping in mind the principle of "safety first" can we ensure our own life safety.

New Bucket Elevator

New Bucket Elevator

Introduction of New Bucket Elevator:

The New Bucket Elevator is a new type developed model compare with DTY Bucket Elevator.

Its design similar with Japanese Satake Type, with lot of advantages. it is widely used for continuous vertical lifting for granular materials, such as wheat, maize, sesame, kidney beans, chia seed, quinoa seed etc. It extensively applies for the lifting of bulk stocks in feeding stuff plant, flour mill, and grain depot of different scale.

Advantages of New Bucket Elevator:

New Bucket Elevator,Low Damage Bucket Elevator,Grain Elevator,Vertical Bucket Elevator

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com