Ruby hard mining environment

Ruby origin is relatively small, mainly in Myanmar, Thailand, Sri Lanka, Vietnam, India, Tanzania, China and other places. Moreover, there is usually a saying that "ten treasures and nine cracks" means that most rubies have cracks, smashes, cracks, etc. Very pure and perfect rubies are very rare. Sapphire is mainly distributed in Myanmar, Thailand, Sri Lanka, the Bailin area of ​​Cambodia, Kashmir, India, Australia, Montana, China and other places.

So, understand the origin of ruby, how do we exploit it?

Igneous rocks and metamorphic rocks are key factors in the formation of corundum gemstones. Secondary deposits originate from the most prone to mineralization of these main rocks. If so, we can look for gems in a more specific place in such a vast area.

Time-tested panning techniques are one of the most common and useful prospecting methods. Basically, it consists of exploring river grit. Due to the highly defined gravity of corundum, it is more commonly concentrated in rivers and creek riverbeds. Exploration includes sampling of river gravel layers and begins downstream of the river. When even very small corundum is found, people regularly work downstream from the downstream and sample along the way. Termination of anything is not discovered. Then the next step is to fold back to the exact location where the gemstone starts. From here, further sampling will be determined on the shores of the appropriate rivers and streams from the corundum.

Working upstream will be very promising to bring a piece of corundum to the original rock. However, theory is often simpler than practice, and such a method has been used throughout the history to locate mineral deposits.

Most of the world's rubies are found in small areas of alluvial deposits. The more precious the environment is, the harsher the environment is. Similarly, the red sapphire mining conditions are very difficult. For example, the ruby ​​produced in Burma usually needs to be stripped to a thickness of 15 feet to reach the gemstone-bearing gravel layer. Then, you can really mine.

? Mining operations is how to accomplish it first of all, the huge boulders removed, and then the gravel with stones to a centralized location, screened by a metal mesh screen, the main steps divided into three steps: the first step , removing the largest size stone on the highest sieve; the second step, removing the medium size gravel on the second stage sieve; and the third step, leaving the smallest size gravel on the third stage sieve. Gravel has been chosen, how to choose the gems? The general method of operation is: one hand with a tool to remove the gravel, and the other hand to pick the gems. Put the selected gems in the bamboo raft and push the picked gravel from the table. Because there may be small stones in the discarded gravel, you can continue to choose.

As the demand for rubies rises, heavy equipment and complex prospecting methods are applied. Australia is one of the world leaders in the mining and exploration of corundum. In this series of processes, we need not only patience and careful screening, but more importantly, the test of our perseverance and perseverance. It is not difficult to imagine that the gradual selection of exquisite and beautiful gems from a large number of gravel is like a layer of sand and sand. This carefully selected work consumes a lot of manpower, material resources and time. When we finally get a gemstone with a shining brilliance, the most beautiful movement bearing the memory of the river is emerging in front of us. Rare and more precious.

The conditions for mining red sapphires vary from place to place. In some places, there are many small and small pegmatite veins. These rock layers are steep and steep. In the place where marble and pegmatite interpenetrate, we can find corundum and many sapphire are produced in alluvial deposits.

Moreover, some gemstones are located on remote desert islands, with hot summers and severe winters. Some mines are located on cliffs, which seriously affects the mining of gem deposits and brings many difficulties to miners.

Such a harsh climatic condition allows us to know more about gems.

Metalworking is the process of working with the metals from iron, steel, non-ferrous metals to create individual parts, assemblies and so on. The term covers a wide range of work from Iron Castings, Steel Castings and Copper Castings. It therefore includes a correspondingly wide range of pump parts, valve parts, Auto Parts , Electrical Components etc..