The transparent film on the surface of the automobile body is also called "Rhino leather" or "Rhino leather" protective film. When the car is driving, it encounters bumps. In order to protect these vulnerable parts, a method of attaching a body watch to protect the film can be used. It is a special kind of transparent resin. Because it is as tough as rhino leather, it is named. Many famous cars sticked this kind of protective film on the vulnerable parts of the car before leaving the factory. Some important parts of luxury cars such as BMW, Porsche, and Mercedes-Benz also did a “thin skin†protective film treatment. 1 protective film loading The method of mounting the transparent film on the surface of the vehicle body is as follows: (1) Select the appropriate size. Before fitting, the appropriate size should be selected according to the width of the part to be attached. The width of the rhino skin is 70mm, 80mm, 100mm, 150mm and 200mm. (2) Clean the table to be posted. The special cleaning agent should be used to thoroughly clean the treated parts. (3) The body surface protective film is attached. Remove the protective film of Rhinoceros and stick the adhesive surface directly to the clean area. Then use a plastic spatula to compact and remove the air bubbles inside. 2. Change of protective film Porsche Automotive Tuning Store in Nanjing recommends that when the car is severely scratched, the protective film will be damaged and it should be replaced in time. When changing, ask the technician not to peel it off and peel off the top coat together. Therefore, when replacing, an electrically heated dryer can be used to evenly heat the adhesive part, so that the adhesive strength of the adhesive is reduced, and then the adhesive is removed while being heated while being small. Replace the new protective film as required. Nanjing car foil prices how much? The absolute price is reasonable. If you are interested in our automotive film products, you can contact us through the following contact information, thank you for your support to our company, I wish you a happy life! !
X Ray Machine
The system matches with metal ceramic X-ray tube and high
frequency solid insulate industrial X-ray HT generator, it applies forced
cooling system to make sure X-ray machine can normally continuous work for 24
hours. The dimension of this kind of small focus X-ray tube is half of
traditional focus tube, geometry unintelligibility is an important factor which
affects image quality, if focus bigger, correspondingly, geometry
unintelligibility is deeper, and also makes image edge much more blur; if focus
smaller, geometry unintelligibility is lighter, it can improves image quality
at same time, also focus is smaller can inspect smaller failure which is favor
to improve X-ray RTR inspection stability.
The controlling part of system is researched and
manufactured by ourselves, the intelligent main control PLC works matches with
touch screen, beautiful and complete functional stainless steel panel that can
display and adjust parameters much more convenient. When high voltage of system
opens, there will be red light alarming signal outside of protect door, here
installs interlock devices between lead door and system, in the case of opening
lead door, system will stop radiation at once to assure safety of operators.
Butt Weld Pipe RTR System,Boiler Pipe RTR System,Casting RTR System,Wheel Hub RTR System Dandong Nondestructive Testing Equipment Co., Ltd. , http://www.ddchinaxray.com